top of page


Save & Earn cash back every time you shop online or in-store
Find Out More👇
PM 012-6730686 /


The Blackmagic Design ATEM Streaming Bridge for ATEM Mini Pro Streaming Switchers allows you to convert the IP signal from any ATEM Mini Pro unit into SDI and HDMI video. It features two SDI outputs and a single HDMI output and supports resolutions up to 1080p60. You can connect the Streaming Bridge directly to the streaming output of your ATEM Mini Pro, and it will provide SDI and HDMI output for use in broadcast environments, or directly to a monitor. You can also connect the streaming bridge to the same LAN that an ATEM Mini Pro is connected to, and the devices will find each other allowing you to easily stream across the network.

The downloadable software enables you control the decoding settings as well as set an IP address to the device and save that information to your computer. That information can be emailed to any computer connected to an ATEM Mini Pro, and this allows the ATEM Mini Pro to locate and stream to the Streaming Bridge connected to the internet.

Blackmagic Design ATEM Streaming Bridge for ATEM Mini Pro Streaming Switchers

SKU: ATEM Streaming Bridge
  • Key Features

    • For Any ATEM Mini Pro Streaming Switcher
    • HDMI and SDI Outputs
    • Up to 1080p60 Resolution Output
    • Direct, Network, and Internet Connection
    • IP Addressable, Software Controllable
  • Output

    Video Output Connectors 2 x BNC (3G-SDI / HD-SDI)
    1 x HDMI (HDMI 1.4)
    Output Video Format HDMI
    1080p: 23.98/24/25/29.97/30/50/59.94/60 fps
    1080i: 50/59.94/60 fps
    SDI (10-Bit 4:2:2 YUV)
    1080p: 23.98/24/25/29.97/30/50/59.94/60 fps
    1080i: 50/59.94/60 fps
    Audio Output Connectors None


    Video Standard Compliance SMPTE 259M/292M/296M/424M-B/425M-A/425M-B


    Other I/O 1 x RJ45
    2 x BNC Reference
    Expansion Slots None

    IP Streaming

    Video IP Decoding H.264: 1920 x 1080


    Power Connector 1 x Barrel (6 to 30 VDC) Input
    Power Consumption Device: 6 W


    Operating Temperature 32 to 104°F / 0 to 40°C
    Storage Temperature -4 to 140°F / -20 to 60°C
    Operating Humidity 0 to 90% (Recommended)


    Certifications CE, FCC, Kcc, as per Manufacturer
    Dimensions 5.28 x 3.63 x 0.9" / 13.41 x 9.22 x 2.29 cm
    Weight 8.1 oz / 230 g
    Warranty Length Limited 1-Year Warranty
bottom of page