Record selfies for social, run-and-gun mobile video, two-person interviews, stereo concerts, and more with the Comica Audio Traxshot, a versatile, camera-mount shountgun mic for DSLR/mirrorless cameras, and iOS/Android smartphone equipped with a headphone jack. This all-in-one microphone sports a clever dual-capsule design, allowing you to secure the best possible mic positioning for your specific needs, from TikTok videos to documenting your family vacation with clarity and poise.

Choose among four different modes depending on what kind of audio you want to record. The mic plugs into the 3.5mm TRS input of your camera, or the 3.5mm TRRS headphone jack of your smartphone. A dedicated 3.5mm headphone jack allows you to monitor audio straight from the mic whenever you want to. The built-in battery lasts up to 20 hours, and charges over USB. A built-in windshield effectively reduces ambient wind noise, and two outdoor furry windmuffs are supplied, as are all the cables you'll need—including the USB charging cable.

A True Multipurpose Mobile Mic

With its clever design, the mic lends itself to many different purposes. Capture selfie videos with clarity using the mono mode. Use the Tight Stereo mode for locational audio events, such as weddings or parties. The Wide Stereo mode is suitable for anything from concert recording to B-roll ambiance pickup. The Bidirectional Front/Rear mode is an ideal choice for two-person live interviews.


Multiple Mounting Options & Robust Build

The Comica Audio Traxshot features two separate mic capsules that can be independently oriented to capture the audio for a variety of purposes. The mic has an integrated shoe mount for your device. This shoe is outfitted with a proprietary Air-Float shockmount that absorbs vibrations in all directions, minimizing handling noise. You'll also find a 1/4"-20 thread at the bottom for mounting the mic on a tripod.

For outdoor shooting, a low-cut filter and two included furry windmuffs help reduce low-frequency noise caused by stronger wind and/or camera shake. The rugged, all-metal construction provides additional shielding against RF interference.


All the Controls You Need

The Traxshot features a continuously variable gain knob to adjust your recording level on the fly as well as a low-cut switch to ameliorate any low-frequency rumble issues. The 3.5mm audio output allows you to plug a set of headphones into the mic itself, so you can monitor the quality of your audio while shooting. A high-resolution IPS display clearly shows you the microphone status and battery life.

Comica Audio Traxshot Transformable Camera-Mount Shotgun Microphone

SKU: Traxshot
RM549.00 Regular Price
RM498.00Sale Price
  • Key Features

    • Mobile Journalist, Vlogger, Videographer
    • Dual-Capsule Multipurpose Shotgun Mic
    • TRS & TRRS for Cameras or Smartphones
    • Integrated Shockmount & Windscreen
    • Cables & Furry Windmuffs Included
    • Mono, Stereo & Front/Rear Pickup Modes
    • Gain Control & Built-In Monitoring Jack
    • 20-Hour Battery Life
    • Rechargeable Battery over USB
  • Microphone

    Form Factor Camera-Mount
    Sound Field Mono, Stereo
    Stereo/Surround Configuration X/Y
    Capsule 2 x Electret Condenser
    Polar Pattern Supercardioid
    Pattern Selection Switched (Adjustable on Mic)
    Orientation End Address
    High-Pass Filter Yes
    Gain Adjustment Yes
    Indicators 1 x Multi-Segment LED (Battery, Status)
    On-Board Controls Gain/Sensitivity, Polar Pattern
    Windscreen Built-In, Windsock/Windjammer (Included)


    Frequency Range 20 Hz to 20 kHz
    Maximum SPL 100 dB SPL
    Impedance 600 Ohms
    Sensitivity -40 dB
    Signal-to-Noise Ratio 60 dB


    Output Connectors (Analog) 1 x 1/8" / 3.5 mm TRS Female (on Mic)
    1 x 1/8" / 3.5 mm TRS Male (on Detachable Cable)
    1 x 1/8" / 3.5 mm TRRS Male (on Detachable Cable)
    Headphone Connector 1 x 1/8" / 3.5 mm


    Operating Voltage Not Specified by Manufacturer
    Battery Type 1 x Built-In (Included)
    Battery Chemistry Lithium-Ion
    Approximate Battery Life 20 Hours


    Mounting Camera/Shoe-Mount (via Integrated Hardware)
    Construction Material Metal
    Dimensions H: 2.4 x W: 2.6 x L: 4.8" / H: 62 x W: 65 x L: 122 mm
    Weight 4.6 oz / 130 g